Fasco D112 Fan and Blower Motor, 1/10 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 4.4" Diameter, OAO ENCODER KITS

Fasco D112 Fan and Blower Motor, 1/10 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 4.4" Diameter, OAO ENCODER KITSGeneral Purpose Motor 4. 4" Diameter Shaded Pole Thermally Protected Enclosed Shaft End End Frame, Open Lead End End Frame, Semi Enclosed Shell, Air Over Class A Insulation, 40C Ambient Sleeve Bearing 3 8" Diameter Shaft with Flat 27" Leads Extended Studs Shaft End, Hex Mounting Hub Shaft End and Lead End Additional Information Thermal ProtectionThermally Protected Speed1500 rpm Current3. 6 A Number of Speeds1 Ambient Temperature40 C ULRecognized

12 IN Power Factor 66 Product Family Wash Down Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

15 STARTCAPMFD N\A SHIPPING WEIGHT 624 BREAKDOWN TORQUE 249 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 209 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 301

250 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3490 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

automatic Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 207A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Steel Tropicalized Painting Without Fan material Plastic Bearing cap Yes- Bearing Cap Balancing Method 1/2 Key Drip Cover Without Pump Seal Gasket Connection Cables Quantity 9 Downloads

Model_Number C063HWK5174015B PRODUCT NAME 1 HP - TEFC - 3450 PHASETYPE 1_CAPACITOR START MOTOR ENCLOSURE TEFC HORSEPOWER 1 KILOWATTS 0

10" Switch Leads with Quick Connect Terminals

25 STARTCAPMFD N\A SHIPPING WEIGHT 112 BREAKDOWN TORQUE 240 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 200 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 38 NEMA NOMINAL EFFICIENCY 82

0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 1

119 Ohms A Ph / 0 Ohms B Ph Temp

5 MOUNTING C-FACE/BASE MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 40 ROTATION CCW DRIVE END REV STARTCAPMFD 208 SHIPPING WEIGHT 17 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 32

49 LB-FT Starting Current 51

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code L Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 0516M Mounting Arrangement F1 Number of Poles 2 Overall Length 12