711I EPOXY 1.25KG SETAn epoxy system for crack filling of expensive white and other colour marble. 1kg of resin and 250gm of hardener. Description UV resistance epoxy for white and colour marble. It is highly transparent, clear and has good yellowing resistance. Highly suitable for all types of white and expensive Italian marbles like Onyx, Australian white, Carrara white, Satvario etc. Method of Application Grind the surface to grit 100 and leave them to dry for 16 20
It comes with hardener paste
1 Part Viscosity 40°C± 2°C of mixture Low Gel time at 40°C± 2°C of mixture 35-40 minutes @ 20°C Drying time/moving of slab 40°C ± 2°C 70-80 minutes @ 45°C Polishing of surface After 48 hours Unit pack 4kg of resin and 1kg of hardener Category Crack filling epoxy system for white and colour marble
filling smaller pores
re-grind using magnesite abrasive grit 120
Very good epoxy for white and coloured marble with high shine
immediately and completely remove excess S748 using paper towels and rub the surface dry
as well as oil and grease from the surface of the joint
Lay small quantity of product evenly on the clean and dry surface
excellent in crack & pin holes filling
Suitable for filling joints
Colour pigments can be mixed to match the colour of stones
The pressure applied is 1-2 bar
