Bando XPA857 Metric V-Belts CXBando XPA857 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery and
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 14 AWG Motor Type 3754M Mounting Arrangement F1 Number of Poles 4 8 Overall Length 20
877 Ohms B Ph Start Configuration DOL Break-Down Torque 30 LB-FT Pull-Up Torque 2
Frame 324/6T Output 20 HP (15 kW) Number of Poles 6 Frequency 50 Hz Rated speed 980 rpm Slip 2
Model CFDB2-125-224 Power 0
Amperes 229/133 A LRC 6
lb Locked rotor torque 220 % Breakdown torque 240 % Locked rotor time 25s (cold) 14s (hot) Moment of inertia (J) 26
29 IN Power Factor 77 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
automatic Shaft Material SAE 4140 Carbon Steel Painting RAL 5009 203A (ISO 12944 - C2) Grounding Lugs Double Fan Cover material Cast Iron Tropicalized Painting Without Fan material Aluminum Bearing cap Yes- Bearing Cap Winding thermal protection Thermostat - 2 wires 1 per phase 155°C Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 6 Features
6 POLES 2 NUMBER SPEEDS 1 RPM 3450 RPM 2 2850 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 115/208-230 & 110/220 V VOLTS 115 VOLTS 2 208 VOLTS 3 230 VOLTS 4 110 VOLTS 5 220 FRME 56 SHAFT CODE C STATOR DIAMETER 5
92 IN Power Factor 85 Product Family General Purpose Product Type D-SERIES BRAKE MOTORS Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1760 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SB Winding Thermal 2 None Drawings
Model_Number CL05 PRODUCT NAME 7
