2000w hub motor laced in 26"/27.5"/29" wheel alone Carrera torque arm

2000w hub motor laced in 26"/27.5"/29" wheel alone Carrera torque armPLEASE NOTE THAT THESE COME WITH XT150 PHASE CONNECTORS NOW. Max current they can handle is 45 amps Max raccomended voltage 72v 3. 5t motor Dropout size is 135mm 1410mm axle so will require 14mm torque arms (see my torque arms section for custom torque arms if needed) Mtx39 double walled rim Freewheel included please choose between single speed, 7 speed, 8 speed or 9 speed

especially for setups of 2000w and above

KT-LCD3 screen 24/36/48/52v

same rim that comes laced on hub motors

Basically all forks woth a 20mm axle and 110mm spacing

this means that it will fit frames of all tube sizes which means you will not need to pull the straps to make them "close" which stresses the straps and the bag and eventually leads to rips

Each torque arm is supplied with two m5 bolts

-The straps are sewed onto the bag on a greater surface area so the weight of the contents of the bag are spread across a a bigger area so the straps are less likely to rip or just be able to carry more weight overall

rockshox boxxers

I have the juliet connector kt-lcd3 screens too but please specify or contact me if you are specifically looking for that screen otherwise I will send the 5 pin one

Please note the bike in the photos is just for illustrative purposes and will not come with the kit

*I know that most frames are 135mm dropout frames and I used to supply 135mm motors but they turned out to be troublesome compared to 150mm dropout motors

-Rim protector included