Bando H300U-OPEN Open End White Polyurethane with Steel Cords DS3MBando H300U OPEN Synchro Link Open Ended Belting is available in RMA and metric pitches in both neoprene and polyurethane construction. A number of configurations are offered to satisfy most applications requiring synchronization and specialized uses such as conveying, positioning, metering, etc.
28 IN Power Factor 79 Product Family Washdown Features Pulley Face Code C-Face Rodent Screen None Service Factor 1
VM3543T SPEC
7 POLES 4 NUMBER SPEEDS 1 RPM 1750 RPM 2 1750 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 184 SHAFT CODE TC MOUNTING HORZ-FOOTLESS ASSEMBLY POSITION NA MOTOR TYPE LEF OPPOSITE END BEARING 6205-J/C3 SHAFT END BEARING 6307-J/C3 AMBIENT 40 SERVICE FACTOR 1 STARTCAPMFD N\A SHIPPING WEIGHT 118 INSULATION CLASS F KVA CODE LETTER J NEMA NOMINAL EFFICIENCY 89
Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 75 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC Electric Motors
83 % Rated voltage 400 V Rated current 53
Rise @ Rated Load 63° C Start Configuration DOL Break-Down Torque 320 LB-FT Pull-Up Torque 146 LB-FT Locked-Rotor Torque 183 LB-FT Starting Current 257 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
Bando - 11-5VK760 Power Ace® Aramid Combo
Frame Material Rolled Steel Impregnation Method Dip and Bake Polyester Main terminal box hole NPT 1" Terminal Block Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 207A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap No-Without Bearing Cap Balancing Method 1/2 Key Drip Cover Without Resilient Base Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 9 Downloads
67 % Rated voltage 240/415 V Rated current 8
1x(Code J) No load current 100 A Rated torque 663 ft
75 IN Pulley End Bearing Type Ball Pulley Face Code Standard Service Factor 1
Bando - P34-8M-30 The type of pulley used on a Synchro-Link® drive depends on a number of factors
