Bando 5M975 Banflex CONNECTORS

Bando 5M975 Banflex CONNECTORSBando 5M975 The small cross section of the BanFlex belts makes them the preferred choice where short center distances and small diameter sheaves are required on compact equipment designs. The 60 sidewall angle and precision molded, seamless construction allows for precise belt to sheave meshing in high speed applications up to 10,000 RPM. Precision cast, seamless polyurethane body for maximum power transmission capability at high speeds. Polyester

Ribs/Teeth/Angle43

Bando - D175 Continuous improvements in materials

5 NEMA NOMINAL EFFICIENCY 93 FULL LOAD AMPS PRIMARY 47/27 SERVICE FACTOR AMPS PRIMARY 54/31 Technical Data

Packard82505

625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3540 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3 Drawings

12-0000-2203 FRAME 324TC VOLTS 575 F

37G815Q067G1 HP 5 VOLTS 230/460 AMP 14

VSSFWDM3542 SPEC

Bando - TB235 timing belts are designed and built to provide the positive

9 a Frame Prefix D Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3528M Mounting Arrangement B3 Number of Poles 4 Overall Length 13

lb Locked rotor torque 200 % Breakdown torque 240 % Locked rotor time 72s (cold) 40s (hot) Moment of inertia (J) 95

4 A Rated torque 177 ft