Bando 60-S2M-324 S2M Timing Belt Multi-Speed

Bando 60-S2M-324 S2M Timing Belt Multi-SpeedBando 60 S2M 324 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 12/6 Degree of Protection IP55 Synchronous speed 600/1200 rpm Output rating 7

Amperes 721/361 A LRC 6

Applied product CFW700 Description Hmi frame Model/Complement RHMIF-02 Application Variable speed drive Certification CE

Bando - 7-5VK1250 Power Ace® Aramid Combo

lb Locked rotor torque 280 % Breakdown torque 360 % Locked rotor time 14s (cold) 8s (hot) Moment of inertia (J) 1

Bando - C46 Continuous improvements in materials

NM3455 SPEC

Frame 180M/L Output 22 kW (30 HP) Number of Poles 2 Frequency 50 Hz Rated speed 2960 rpm Slip 1

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3530M Mounting Arrangement F1 Number of Poles 2 Overall Length 13

375 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed Code Single Speed Motor Standards NEMA Starting Method INVERTER SPECIAL Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Start Configuration DOL Break-Down Torque 235 LB-FT Pull-Up Torque 86

Open PSI575