Toshiba 0402SDSC41B-P General Purpose Motor MEDIUM VOLTAGE SOFT-STARTERS

Toshiba 0402SDSC41B-P General Purpose Motor MEDIUM VOLTAGE SOFT-STARTERSFeatures Efficiency: NEMA PREMIUM Additional Information Electrical TypeThree Phase HP40 RPM3600 Frame324TS EnclosureTEFC PhaseThree Voltage575 RotationREV OverloadNone MaterialCast Iron MountingRigid Base Amperage38

33 % Rated voltage 400/690 V Rated current 14

Model LW3-S300 Terminal type Terminal lug Rated voltage 600 V Product type Overload relay Product line RW SERIES Number of terminals 3

7 a Number of Poles 6 Overall Length 38

9 No load current 16

902 lb-ft2 Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Frame Prefix D Heater Indicator No Heater Insulation Class F Lifting Lugs No Lifting Lugs Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 14 AWG

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1180 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

37 kW) Number of Poles 6 Frequency 50 Hz Rated speed 955 rpm Slip 4

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3744M Mounting Arrangement F1 Number of Poles 2 Overall Length 20

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 10 AWG Motor Type 4056M Mounting Arrangement F1 Number of Poles 6 Overall Length 25

Rise @ Rated Load 92° C Start Configuration DOL Break-Down Torque 226 LB-FT Pull-Up Torque 109 LB-FT Locked-Rotor Torque 139 LB-FT Starting Current 188 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

35X046N906G1 HP

Jet Pump C Face