COLOUR PIGMENTS FOR EPOXY - 100gm Color:Botticino

COLOUR PIGMENTS FOR EPOXY - 100gm Color:BotticinoThe easy colour system to obtain the right colour to mix with the epoxy. 100gm. Description Epoxy colours are available in the paste form to mix with any epoxy to get the desired shade. These are specially recommended for marble. The shade card is as shown in picture gallery. Method of Application Mix the colour to already weighed resin and match with the stone colour. Mix the hardener in the required ratio and mix well apply in the stone. CAUTION TO

extraordinary clear

Mix resin and hardener in the ratio 4:1 by a weight and apply the mixture uniformly on the full surface of marble

Buff by hand or machine (175–1500 RPM with lamb’s wool pad) for a high-gloss finish

S731 is a ready to use silane based impregnator that reduces the penetration of water and dirt into rough or honed natural stone surfaces (soft and hard stones)

4'' Floor pad for polishing granite

S tools are employed

Normally one epoxy remover that is 24 LX is sufficient but if required

remove the excess with cotton cloth and allow it to dry completely

micro cracks

Suitable for different types of surfaces: concrete

Improves colour and hardness of stone

Polishing powder for final polishing and re-polishing of marble