Bando P21H300 MPB TB Pulley 1" Rib Ace V-RibBando P21H300 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Bando - TL2525 1 15/16 TL® bushings are preferred where mounting space is at a premium
15 NEMA-NOM-EFF 84 RATING 40C AMB-CONT CC 010A DE 6206 ENCL TEFC BLANK 20:1CT
375 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1485 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Drawings
Frame 444/5T Output 125 HP Number of Poles 6 Frequency 50 Hz Rated speed 980 rpm Slip 2
CECP3667T SPEC
7 POLES 4 NUMBER SPEEDS 1 RPM 1760 HERTZ 60 VOLTS PRIMARY 200 VOLTS 200 FRME 184 SHAFT CODE TCH MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE UTE OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6206-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
Catalog Number L1322TM Enclosure OPEN Frame 145T Frame Material Steel Frequency 60
24 VITON 35FN3002A04SP EXFN
Catalog Number ECP44304T-4 Enclosure TEFC Frame 449T Frame Material Iron Frequency 60
6" diameter
weight³ 209 lb Efficiency
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 6 Degree of Protection IP55 Synchronous speed 1200 rpm Output rating 150 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
