Bando P24L075 SH QD Timing Belt Pulley (SH) CENTRIFUGAL PUMP - TEFCBando P24L075 SH The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
33 % Rated voltage 400 V Rated current 19
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination None Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3416M Mounting Arrangement F1 Number of Poles 4 Overall Length 11
361 lb-ft2 Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Heater Indicator No Heater Insulation Class H Lifting Lugs Standard Lifting Lugs Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 12 AWG Mounting Arrangement F1 Overall Length 27
73 % Rated voltage 415 V Rated current 333 A L
2 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 39
Amperes 456 A LRC 6
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 3
50 % Rated voltage 400/690 V Rated current 14
6 POLES 2 POLES 2 4 NUMBER SPEEDS 2 RPM 3450 RPM 2 1725 HERTZ 60 VOLTS PRIMARY 115 V VOLTS 115 FRME 48 SHAFT CODE Y STATOR DIAMETER 5
Bando - 12PK2640 Trusted by the world's Top Automakers
6 POLES 2 NUMBER SPEEDS 1 RPM 3560 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 284 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6310-J/C3 SHAFT END BEARING 6310-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
lb Locked rotor torque 250 % Breakdown torque 270 % Locked rotor time 39s (cold) 22s (hot) Moment of inertia (J) 94
