Bando TL1008 7/8 TL BORE 7/8 (.875) AIR HANDLING

Bando TL1008 7/8 TL BORE 7/8 (.875) AIR HANDLINGBando TL1008 7 8 TL bushings are preferred where mounting space is at a premium. The TL bushing can only be installed in the conventional (large end outboard) position.

Catalog Number CEL11301 Enclosure OPEN Frame 56C Frame Material Steel Frequency 60

TraneMOT6123

15 RUNCAPMFD 50 RUNCAPVOLTS 370 STARTCAPMFD 257 SHIPPING WEIGHT 50 BREAKDOWN TORQUE 344

York025-29041-012

D XP Division Division II Agency Approvals CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 3 Current @ Voltage 7

P36G3112 HP 40 RPM 1785 DRIVE END BEARING 65BC03JPP30A OPP D

lb Locked rotor torque 270 % Breakdown torque 280 % Locked rotor time 25s (cold) 14s (hot) Moment of inertia (J) 0

2 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Termination Flying Leads Motor Type 0618M Mounting Arrangement F1 Number of Poles 2 Overall Length 17

35Y522-0506G1 HP 2 VOLTS 115/230 AMP 23/11

50 % Rated voltage 200 V Rated current 15

75 Number of Poles 2 Phase 1 Product Style BUFFER Shaft Diameter 0

3 POLES 4 NUMBER SPEEDS 1 RPM 1780 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 326 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6211-2Z-J/C3 SHAFT END BEARING 6311-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1